Home Blog Standards

Robot Safety Standards: ISO 10218, ISO 13857 and ISO 14120 Explained

By Devidatt Enterprises, Pune · Published 22 November 2026 · 3 min read

Engineer reviewing robot safety standards beside a yellow robot safety fence
Quick answer

ISO 10218 is the international robot safety standard. Part 1 covers robots and Part 2 covers robot applications and robot cells. Both were republished as second editions in February 2025. For guarding, ISO 14120 covers guards and ISO 13857 covers safety distances.

The main robot safety standards at a glance

StandardWhat it coversWho it matters to
ISO 10218-1:2025Safety requirements for industrial robotsRobot manufacturers
ISO 10218-2:2025Safety requirements for robot applications and robot cells: integration, commissioning, operation and maintenanceIntegrators and plant owners
ISO 12100Risk assessment and risk reduction for machineryAnyone designing or buying machinery
ISO 14120Design and construction of fixed and movable guardsFence and guard makers
ISO 13857Safety distances that stop arms and legs reaching danger zonesFence designers and integrators
ISO 14119Interlocking devices associated with guardsIntegrators and electrical designers
ISO 13849-1Safety-related parts of control systemsControls engineers
ISO 13855Positioning of safeguards relative to approach speeds of the bodyLight curtain and scanner placement

What changed in ISO 10218 in 2025

ISO published second editions of both parts in February 2025. It is the first major revision since 2011. Part 1 is aimed at robot manufacturers. Part 2 deals with industrial robot applications and robot cells, so it matters most to integrators and the plants that run robots. Collaborative applications are supported by ISO/TS 15066.

How the standards relate to a safety fence

A fence is guarding. ISO 14120 covers how guards are designed and built. ISO 13857 covers distances, so people cannot reach the hazard over, under or through the fence. ISO 14119 and ISO 13849-1 apply to the interlock switches and safety circuit that stop the robot when a door opens.

A fence on its own does not make a robot cell compliant. The risk assessment, the safety devices and their wiring all matter.

Are these standards mandatory in India?

ISO standards are voluntary unless a law, regulation or your customer’s contract requires them. The rules that apply to your plant depend on its activity and location, so confirm with a qualified safety professional. Many plants use ISO standards as the benchmark for robot safety.

How we use the standards

We plan panel height, gaps and reach distances with reference to common machine-guarding standards such as ISO 14120 and ISO 13857, and we make doors ready for safety door switches. Final compliance depends on your site risk assessment, device selection and wiring. See our robot safety fencing and robot cell safety fencing.

Standards are copyrighted documents. Buy them from ISO or your national standards body. This article is general information, not legal or engineering advice.

Common questions

What is ISO 10218?

ISO 10218 is the international safety standard for industrial robots. Part 1 covers robots and Part 2 covers robot applications and robot cells. The current editions were published in February 2025.

Which standard covers robot safety fence design?

ISO 14120 covers the design and construction of guards, and ISO 13857 covers safety distances. Both are used with a risk assessment under ISO 12100.

Is ISO 10218 mandatory in India?

ISO standards are voluntary unless a law, regulation or contract requires them. Check the rules that apply to your plant with a qualified safety professional.

Need robot safety fencing for your plant?

Send your layout drawing or site measurements to info@robotsafetyfencing.com or on WhatsApp, and see our robot safety fencing and robot cell safety fencing.

Keep reading:

Let’s guard your robots

Call, WhatsApp or email us your layout. We reply with a priced proposal, usually within one working day.

info@robotsafetyfencing.com

CallWhatsAppQuote